2000 Watt Pure Sine 12 Volt Power Inverter w/Transfer Switch

Features:

• Pure sine
• ETL listed and conforms to UL458 standards
• Hard wire direct connect terminal block for AC
• 2000 watt continuous power
• 4000 watt surge
• Over voltage shutdown
• Bypass whether inverter is on or off
• Under voltage shutdown
• Intelligent cooling fan
• Automatic transfer switch 25 amps
• Conformal coated for marine applications
• AC pass through without being turned on or connected to a battery bank
• 25A resettable AC breaker
• No programming or DIP switch changes needed for operation
• Remote switch available
• Less than 20msec typical transfer time
• 2 year warranty

Specifications:

• 2000 watts continuous
• 4000 watt surge (not recommended for start up applications)
• Built in automatic transfer switch 25 amp transfer <20 msec
• Bypass/throughput = 25 amps. Do not exceed, damage may occur and void warranty.
• DC input voltage 10-16V
• AC input voltage 120VAC +/-10%
• Output voltage 120VAC, 60HZ
• Efficiency 86-90%
• THD: <3%
• Over voltage shutdown 16VDC +/- .5V
• Under voltage shutdown 10VDC +/- .5V
• Under voltage alarm 10.3VDC +/- .3V
• Over temp protection 150 degrees F +/- 5 degrees F
• Thermal fan
• Pure sine output
• No load current: 1.2A
• Direct connect terminal block

Optional Remote:

Part # REMOTEHF Optional Remote on/off switch (new flush mount design)
Dip switches to black out the lights if preferred.
L x W x H: 3 x 2.06 x 1

Dimensions:

• L x W x H: 21.5″ x 9.5″ x 3.5″
• Unit – 14.4 lbs.
• Boxed – 18 lbs.