The Aims ETL listed to UL 458 standards AIMS 1000 watt pure sine inverter charger has surpassed the ETL requirements and includes a 2 year warranty. This inverter is a a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 92%. It is packed with unique features and it is one of the most advanced inverter chargers on the market today. It features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
The powerful battery charger is capable of 120 volts at 35 amps, and with power factor corrected, it uses 20-30% less energy from AC input than a standard charger, avoiding nuisance breaker trips or generator overloads. In response to the increasing demand of more advance battery charging, this model is equipped with Batter Temperature Sensing for increased charging precision. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
Features:
- Listed to UL 458 standards
- 1000 watt low frequency inverter
- 3000 watt surge for 20 seconds -3x surge capability
- Dip switches – battery priority selector
- Optional battery temp sensor
- Terminal block
- GFCI – 10 A
- Marine coated and protected
- Multi stage smart charger 35 A
- Remote panel available
- Auto gen start
- Auto frequency
- 10msec typical transfer time
- 7 battery type settings for charger
- 2 year warranty and free tech support
Output Specifications:
- Listed to UL 458 standards
- Continuous output power: 1000 Watt
- Surge rating: 3000 Watt (20 seconds)
- Output waveform: pure sine
- Output voltage: 100-110-120 VAC
- Nominal efficiency: >92% (peak)
- Line mode efficiency: >95%
- Output breaker – 10 A
- GFCI Breaker : 20 amps
- Output frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical transfer time: 10ms (max)
- THD: < 10% DC
Input Specifications:
- Nominal input voltage: 12.0 VDC
- Minimum Start Voltage: 10.0 VDC
- Low Battery Alarm: 10.5Vdc-11.0 VDC
- Low battery Trip: 10.0Vdc-10.5 VDC
- High Voltage Alarm: 16.0 VDC
- Low battery Voltage Restart: 13.0 VDC
- Idle Consumption: 12.5 W
- Input charger breaker – 10 A
- Power Saver Mode Idle Consumption: 7.5 W
- Transfer load: 10 A
Charger Specifications:
- Output voltage: depends on battery type
- Charger rate: 35A
Dimensions:
- Unit weight: 36.5 lbs.
- Unit size L x W x H: 15.35 x 11 x 7 inches
- Shipping weight: 44 lbs.
- Shipping L x W x H: 20.5 X 13.8 X 12.2 inches
2 Year Warranty
Reviews
There are no reviews yet.